Corvette Supercharger Kit - Magnuson TVS2300 : 2006-2013 Z06 LS7

SKU: 31126175
Manufacturer Part Number: 01-10-58-083-BL
Availability: Usually Ships In 3-5 Days
$7,450.95

Magnuson’s MP2300 TVS Supercharger Kit can unleash the true power of your LS7 Corvette C6 Z06 7.0L. This kit is designed to fit the 2006+ C6 Chevrolet Corvette Z06, and it will deliver maximum performance while retaining factory-like drive-ability and reliability. Generating 5 psi of boost, this Magnuson TVS2300 Hybrid Roots Style Supercharger delivers power gains of approximately 130 horsepower and 130 foot-pounds of torque at the rear wheels! But peak horsepower and torque numbers can't tell the whole story. "Under the curve" power is significantly enhanced delivering near instantaneous acceleration that really pins you and your passenger back in your bucket seats.

Inside of the supercharger manifold, a large liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system that has IATs that are typically only 20-40 degrees (Fahrenheit) over the ambient temperature.

Maximizing your Z06's efficiency during cruising is the job of the supercharger’s integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to “free-spin" under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like drivability and fuel economy - giving you a package that delivers power without compromise.

Down to the smallest part, our MagnaCharger Corvette lineup of bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don’t lose track of parts in the middle of your installation. All of the hardware that you will need in order to compete a full install is included so you won’t need to run to your local parts store in the middle of your installation. In addition, our full color, step-by-step Installation Manuals will walk you through the install process with exacting attention to detail.

Magnuson’s MP2300 TVS supercharger utilizes EATON’s latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson’s patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in our TS16949 certified facility – the highest ISO OEM quality certification standard in the market.

Backed by a 3-year/36,000 mile warranty this supercharger is built to last. Designed to be nearly maintenance free you won’t have to worry about anything once it is installed. And for those that don’t want to have to stress about voiding their factory powertrain warranty we offer a solution for that as well. Our optional powertrain warranties will give you the peace-of-mind to be able to enjoy your supercharger without having to worry about those “what if" scenarios. Available with 3-years/36,000 miles, 5-years/60,000 miles, or 5-years/100,000 miles of protection and covering up to $5,000 on the motor, $1,500 on the transmission, and $1,500 on the rear-end with NO deductible you can choose the level of coverage that is right for you. But these protection plans won’t break the bank either – ranging from just $275 for the 3-year/36,000 mile plan to $775 for the 5-year/100,000 mile plan.

MAGNUSON TUNE IS FOR STOCK CORVETTES WITH MAGNA-CHARGER SUPERCHARGER ONLY.  CARS WITH PERFORMANCE MODIFICATIONS CANNOT BE TUNED BY MAGNUSON. CUSTOM TUNING WILL BE REQUIRED, BY YOUR LOCAL TUNER.

Fitment
2006-2012 Chevrolet Corvette 7.0L LS7

Finish
Black

Features
TVS2300 Hybrid-roots supercharger.
Installs in one day.
100% complete bolt-on system.
More power in a smaller package.
180deg. rotation of the supercharger provides a straight airflow path for maximum power and efficiency.
Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph).
Delivers a proven increase in real world "under the curve" power.
High thermal efficiency.
2.4 pressure ratio capability.
High helix four-lobe rotors with 160deg. of twist.
Redesigned inlet and outlet ports.
Improved air-handling characteristics.
Acoustically designed for noise and vibration reductions.
Utilizes all factory "push-lock" connectors

Included Components
6th Generation MP2300 TVS Supercharger with integral bypass valve.
Patented cast-aluminum high-velocity-port intake manifold.
Liquid-to-Air Intercooler.
Extruded aluminum high flow fuel rails.
8 high-flow fuel injectors.
Front and rear fuel crossovers.
Padded Box and UPS 2-Day shipping label for computer return.
Large front-mounted heat exchanger.
All necessary fittings, lines, belts, and hardware required.

Warranty
• Standard 3-year/36,000 mile Warranty on the supercharger hardware 
• Standard 1-year Limited Warranty on electronics 
• Optional 3-year/36,000 mile, 5-year/60,000 mile or 5-year/100,000 mile Powertrain Warranty (additional cost)

Maintenance
Only requires an oil change every 80,000-120,000 miles.

Emissions Status
CARB EO# D-488-17 (2006-2011 Only)

Tools Required
Metric wrench set
1/4in. - 3/8in. and 1/2in. drive metric socket set (Standard andamp; Deep)
3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
Belt tensioner wrench
Phillips and flat-head screwdrivers
1/2in. breaker bar
Fuel line quick disconnect tool (included in kit)
Small or angled 3/8in. drill
Drain pan
Hose cutters
Hose clamp pliers
Safety glasses
Torque angle meter
Hammer
Compressed air
Blow gun air tool
Metric Allen socket set 3/8in. drive
Shop vacuum cleaner
Blue Loctite
Right Angle drill for pinning crank pulley (when required)
Helpful Tool: Air or electric impact wrench

Average Installation Time
10-12 Hours

Size and Weight
Number of Boxes: 2
Box 1 Size: 34"x20"x16"
Box 1 Weight: 85 lbs.
Box 2 Size: 27"x14"x18"
Box 2 Weight: 40 lbs.

NOTE: A Custom raised hood is required with this supercharger.



*** ATTENTION STATE OF CALIFORNIA CONSUMERS ***

Warning Symbol WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov
Top
Loading...