Corvette Front & Rear Brake Rotors : 2009-2013 C6 ZR1

SKU: 3411
Manufacturer Part Number: D602-01-381 / D601-08-381
Availability: Usually Ships In 3-5 Days
$3,489.95
Racing Formula Alloyed Gray Iron & Heat Treated Rotors.

This package includes (front and rear rotors) only
1 Pair of front two-piece open slot rotors
1 Pair of rear two-piece open slot rotors

Benefits:
Less expensive and last longer than stock (ceramic) rotors Pre-assembled for easy bolt on installation Retain use of stock emergency brake

Rotor Material: Racing Formula Alloyed Gray Iron & Heat treated
Machining: Open Slot
Surface: EDP Coating w/cross cut grinding on friction surface

Replacement Components:
Front Rotor Ring: D602-01-381
Rear Rotor Ring: D601-08-381

These two-piece rear rotors are made with the latest technology that is exclusive to RB. The rotor hats are constructed of aluminum with an iron sleeve insert. This allows significant weight savings, while still preserving the use of the stock emergency brake. This design is only available through RB!

NOTE: Retaining and jack screw holes might have been eliminated to prevent the screws from stripping and breaking, causing tremendous effort to remove and replace the rotors. Our two-piece rotor hats are made of aluminum which is easier for installation and removal. See detail view here.

RB rotors are made of harder iron than OE rotors. Our rotors are most compatible with semi-metallic brake pads. We do not recommend the use of ceramic brake pads, which may cause vibration.

1. The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler.


2. The center-mount flanges for hat mounting to the rotor ring have several benefits.

• It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
• The stress load transferred from the ring to the hat is balanced.
• Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
• Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
• Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.

3. Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.

*** ATTENTION STATE OF CALIFORNIA CONSUMERS ***

Warning Symbol WARNING: Cancer and reproductive harm - www.p65warnings.ca.gov
Top
Loading...